Sanguino v1.0, a System Module type part.

an Arduino-compatible board based on the atmega644P

More information: make.sanguino.cc

Generate Part List

Quantity:

Component Parts

Part	Type	Quantity
.100 breakaway header	Electronic Component	50
.100 breakaway header (right-angle)	Electronic Component	6
.100 shunt	Electronic Component	1
10 pin IDC header	Electronic Component	1
100 nF ceramic capacitor	Electronic Component	4
100 uF electrolytic capacitor	Electronic Component	2
10K ohm resistor	Electronic Component	1
16Mhz crystal	Electronic Component	1
1K ohm resistor	Electronic Component	2
1N4004	Electronic Component	1
2.1mm DC socket	Electronic Component	1
22pf ceramic capacitor	Electronic Component	2
3mm green LED	Electronic Component	1
3mm red LED	Electronic Component	1
40 pin DIP socket	Electronic Component	1
6 pin IDC header	Electronic Component	1
7805	Electronic Component	1
ATmega644P	Electronic Component	1
Omron B3F-1000 Button	Electronic Component	1
small heat sink	Electronic Component	1
SPDT switch	Electronic Component	1
M3 nut	Fastener	1
M3 washer	Fastener	2
M3 x 10 cap	Fastener	1
Sanguino v1.0 PCB	Printed Circuit Board	1

Suppliers

Name	Info
RRRF	81

Where is it used?

This part is not used anywhere.

Embed this part list:

<iframe src="http://parts.osotite.com/embed/module/Sanguino+v1.0" width="600" height="500" frameborder="0">Visit http://parts.osotite.com/embed/module/Sanguino+v1.0</iframe>

Wikidot.com embed:

[[iframe http://parts.osotite.com/embed/module/Sanguino+v1.0 width="600" height="500" frameborder="0"]]